Friday, April 27, 2012

Focused Ion Beams

Hi Everyone,



Platinum deposition and cutting of my name into a
Silicon wafer (notice the scale bar is 3 um)
0 degree view of a crater that has been cut for cross
section view.

A quick update, I just finished training to use the Focused Ion Beam yesterday so I am now fully capable of micro machining!  You can do a lot of cool stuff like writing your name into a sample, marking a sample so you can find your targets again and more relevant to my thesis, cut craters in half and see the crater profile.

Platinum deposition helps to protect the sample you want to see a cross section of and helps to bring out the contours of craters.  In parallel with this work, I'm working with Yancey Sechrest, another grad student working for Tobin on a plasma turbulence problem, to create a program that can take a stereo pair (2 images of the same crater at different angles) and recreate a 3D model of the crater.  Hopefully I'll have a post soon with the results of that project

Shu
25 degree view of a crater that has been cut.  The white stuff
is a layer of platinum deposited to make the crater edge more
visible.


Monday, April 23, 2012

Scanning Electron Microscope Pictures

Hi Everyone,

Sorry again for taking so long.  I've been away for a while (in Heidelberg, Germany playing with their accelerator) and working hard at getting scanning electron microscope (SEM) pictures of the craters I'm making with the accelerator.  So without further ado, here's some of the pictures I've taken.  I'm trying to get images of craters and then tilting the image to make a stereo pair and reconstructing a 3D model of the crater.  Enjoy!


Embedded iron particle in Polyvinylidene Fluoride (PVDF) 
Crater in PVDF
Also I'll be doing training to be able to use the Focused Ion Beam (FIB), which is essentially the same thing at the SEM but it can also cut samples and build up structures!
Image of a crater taken in a FIB

The same crater as above but with a cross section cut out


Shu

Thursday, December 22, 2011

Beam Spot

Hi Everyone,


Got to see an actual spark inside the Pelletron, what you
see are the grid lines from the Dust Coordinate Sensor
The beam spot as seen from an astronomy camera
inserted into the middle of the beamline
Sorry for the long time between posts.  I'm trying to whip everyone in shape so they'll start blogging as well.  A couple of really exciting things have happened since my last post.  I've been working on determining why our accelerator speeds have only been up to about 10 km/s.  In order to answer this question, I've been using a CCD camera typically used for taking long exposures of the night sky and putting into the path of the beamline before our detectors.  Letting the dust hit a quartz target directly in front of this camera allows you to take images of the beam profile.  With this we were able to figure out where the beam was pointed, what it looked like, and most importantly, how to point it in the direction we want to point it in.

We were able to determine that at our current running parameters, the beam's best focus creates a spot size of about 2 mm.  By moving the back of the Pelletron we are able to steer the beam.  Using a laser attached to the Pelletron we can steer the beam to very high accuracy.  I was able to move the beam almost exactly 2 mm to the right and 3 mm down in that picture.  With this capability we made sure the beam was pointed through the detectors and then starting taking data.  The result of all that work?  We know see particles up to about 45 km/s!


Shu

Tuesday, September 13, 2011

Beam Profile

The focused spot of the beam profile.  The Einzel focusing
lens will focus particles with a specific charge-to-mass ratio
into a beam as seen 
Hi Everyone,

The halo of the beam profile.  Due to the non-constant
charging process in the source, the charge-to-mass ratio of
each particle can vary greatly.  This leads to this unfocused
halo around the focused spot.
We're still working hard over here at CCLDAS so unfortunately we've been neglecting the blog a little bit.  Some updated info on the accelerator, we've finally got a preliminary image of what the beam actually looks like going down the accelerator.  We put a window and foil as close to the source of the accelerator as we could and we ended up with these images of that foil.  Unfortunately, as you can see, our beam is pretty defocused right now.  Luckily we do expect a central beam plus a diffuse halo around it, which is what we see.  The only problem is that we want that central beam to be more like 1mm than 15, so we've got a bit of work to do.

The reason for the central beam and the halo has to do with the way the dust source works.  This particular source does not charge every particle the same, so the charge-to-mass ratio is not constant across all the particles.  The focusing of the beam on the other hand, is dependent on the charge-to-mass ratio.  What we would expect is that a majority of the particles will be charged to the same  charge-to-mass ratio, giving you a well focused central beam, but then the rest of the particles will end up in the diffuse halo around the central focus.

I'll be continuing these studies into next week and hopefully will have more updates for you by then.

Shu

Wednesday, August 10, 2011

DPS ready for dust testing

The dust position sensor (DPS) is finished and ready to give the position of its first dust particles during a test run in the small accelerator tomorrow. Similar to the dust trajectory sensor (DTS), DPS reads the pulses from induced charges on a grid of wires as a charged particle flies through. Comparing the pulses from each wire allows us to pinpoint the position of the particle. Unlike the DTS, the DPS is small enough to fit inside the beamline and can be placed in a number of locations.

Thursday, August 4, 2011

LDEX flight model is here!!



Exciting news, our first piece of flight hardware is now being calibrated in our dust accelerator. This gives us some serious clout in the dust and space community! A week or two ago we shot dust at the engineering model, which was cool, but this is the real deal! Sorry for the poor picture quality, there wasn't enough light.

Wednesday, August 3, 2011

Hi Everyone,
I've been meaning to create a YouTube account for the lab for a while now and finally got around to it.  This is a time lapse I made using images captured from the dustcam while we were building the accelerator.  Whenever we get cool videos we'll be sure to post them to our account, TheCCLDAS.  Hope you guys like it!
Shu